Skip to main content

10GBASE BiDi 1330nmTX/1270nmRX 10km Simplex LC SMF Optical Transceiver Module

SFP-10G-BIDI2

$32.00

Add to Quote
  • Maximum power consumption below 1W.
  • Hot-pluggable SFP+ design for easy integration.
  • Single LC Interface allows bidirectional connection.
  • Optimises data transfer with a 1330nm DFB transmitter and 1270nm PIN receiver.
  • Extended Reach: Single-mode fiber connectivity up to 10km.
  • Durable Construction: All-metal housing lowers EMI for reliability.
  • Wide Temperature Range: Operation from 0°C to +70°C.
SFP-10G-BIDI2 optical transceiver module

Check out our certified optical transceivers for quality and reliability. Our transceiver modules are flexible and high-performance compatible with multiple vendor brands. Trust in our certified solutions to elevate your network.

10GBASE BiDi Simplex LC Optical Transceiver Module(1330nmTX/1270nmRX, 10km, SMF)

The 10Gbps SFP+ BIDI transceiver sends and receives optical data over single-mode fiber up to 10 km. Single LC interface for seamless two-way communication. Its 1270nm DFB transmitter and 1330nm PIN receiver assure rapid data transfer. It operates reliably from 0 to +70°C (-40 to +85°C for industrial situations). The optical module meets RoHS, IEEE 802.3ae 10GBASE-LR/LW, SFF-8431/SFF-8432, and SFF-8472 standards, making it appropriate for diverse connections and equipment.

With 100 Ohms differential impedance for transmitter input and receiver output, its electrical interface meets SFI standards. Internal AC coupling of data lines ensures signal integrity, while differential termination eliminates EMI for best performance.

Specification

Form FactorSFP+Vendor NameAsterfusion
MediaSMFMax. Data Rate10.3125Gbps
ConnectorSimplex LCMax. Cable Distance10km
Wavelength1330nm-TX/1270nm-RXPower Consumption<1W
Transmitter TypeDFBReceiver TypePIN
Storage Temperature Range- 40 to 85°C (-40 to 185°F)Operating Case Temperature0 to 70°C (32 to 158°F)
Extinction Ratio3.5dBProtocolsIEEE 802.3ae 10GBASE-LR/LW, SFF-8431/SFF-8432, SFF-8472

Connectivity solution

Layer2/3 Open Access & Aggregation Network Switches -Enterprise SONiC Distribution Preload

View All Products
8-Port 2.5G L2 L3 Access Switch

8x 2.5G RJ45 PoE++ L2/3 Access Switch, 2x10Gb SFP+ Uplinks, Enterprise SONiC Ready

8-Port 2.5G L2 L3 Access Switch

8×2.5G RJ45 L2/3 Access Switch, 2x10Gb SFP+ Uplinks, Enterprise SONiC Ready

24x1G-RJ45-L2-L3-Access-Switch-3

24x1G RJ45 POE+ @740W L3 Access Switch, 4x25Gb SFP28/10Gb SFP+ Uplinks, Enterprise SONiC Ready

CX102S-8GT-M-8-Port-L2-L3-Access-Switch-4

8x1G RJ45 POE++ @150W L2/3 Access Switch, 2x10Gb SFP+ Uplinks, Enterprise SONiC Ready

    FAQ

    How does the BiDi technology of this transceiver achieve a 10 km range?
    The BiDi technology, along with single-mode fiber, provides better signal clarity and lower signal loss than multi-mode fiber, enabling extended reach up to 10 km.
    What’s the benefit of a Simplex LC connection over a Duplex LC connector?
    BiDi only uses one fiber strand. Because of this, the Simplex LC connection only has one LC connector port that can send and receive data on the same fiber. Regarding SFP+ transceivers, which use two different fiber strands for transmission and reception, duplex LC connectors are used.

    What should I consider when setting up this SFP+ receiver?
    This SFP+ transceiver supports SMF and LC ports. Ensure your fiber optic cable equipment works together. Two SFP+ transceivers—one for each end—are needed to construct a full transmission link with BiDi technology and single-strand fiber.

    Related Blogs