Skip to main content

SFP+ 10GB-T Compatible Copper SFP+ 30m RJ-45 Transceiver Module

SFP-10G-T

$53.00

Add to Quote
  • Maximum Power Consumption 2.5W.
  • Compact RJ-45 connector, Hot-pluggable SFP+ footprint, Cat 6A Cable.
  • Low EMI Emissions with fully metallic enclosure.
  • TX Disable and RX Los function.
  • Multiple Loopback Modes for Testing and Troubleshooting.
  • Compliant with SFF-8431 and SFF-8432 MSA, IEEE 802.3az, and 802.3an.
SFP+ 10G T optical transceiver module

SFP+ 10GB-T MSA Compatible 10G Copper SFP+ Module 30m RJ-45 Cat 6A Cable 

10GBASE Copper SFP+ transceivers are high-performance, low-cost optical modules that meet the requirements of IEEE 802.3-2015 and IEEE 802.3an for 10 Gigabit Ethernet and 10G BASE-T. With shielded twisted-pair category 6A cable up to 30 meters long. The optical modules use 16-level Pulse Amplitude Modulation (PAM) signals to offer full duplex data links. They give standard serial ID information through the SFP+ MSA, which can be reached at address A0h on the 2-wire serial bus. The physical IC can also be accessed at address ACh through a 2-wire serial bus.

Specification

Form FactorSFP+Vendor NameAsterfusion
MediaCat 6A/7 CableCable TypeCopper
ConnectorRJ45Max. Cable Distance30m
Data Rate10GbpsPower Consumption≤2.5w
Storage Temperature-20 to 85°C (-4 to 185°F)Operating Case Temperature0 to 70°C (32 to 158°F)
RX LOSYesTX Disable functionYes
SFP footprint
Hot-pluggablePower Supply3.3V
DDM/DOMSupportedProtocolsSFF-8431, SFF-8432 MSA, IEEE 802.3az, 802.3an, IEEE 802.3bz

Connectivity solution

Layer2/3 Open Access & Aggregation Network Switches -Enterprise SONiC Distribution Preload

View All Products
8-Port 2.5G L2 L3 Access Switch

8x 2.5G RJ45 PoE++ L2/3 Access Switch, 2x10Gb SFP+ Uplinks, Enterprise SONiC Ready

8-Port 2.5G L2 L3 Access Switch

8×2.5G RJ45 L2/3 Access Switch, 2x10Gb SFP+ Uplinks, Enterprise SONiC Ready

24x1G-RJ45-L2-L3-Access-Switch-3

24x1G RJ45 POE+ @740W L3 Access Switch, 4x25Gb SFP28/10Gb SFP+ Uplinks, Enterprise SONiC Ready

CX102S-8GT-M-8-Port-L2-L3-Access-Switch-4

8x1G RJ45 POE++ @150W L2/3 Access Switch, 2x10Gb SFP+ Uplinks, Enterprise SONiC Ready

16x1G RJ45 PoE+ L2 L3 Access Switch with dual Marvell OCTEON TX2 CN9130 DPUs

16x1G RJ45 POE+@150W L2/3 Access Switch, 2x10Gb SFP+ Uplinks, Enterprise SONiC

X206P-48S L3 Leaf & Core Switch Enterprise SONiC Marvell Aldrin2

24x10Gb SFP+, 6x100Gb QSFP28/40Gb QSFP+ L3 Aggregation/Core Switch, Enterprise SONiC Ready

CX202P-16S aggregation switch 2

16x10Gb SFP+, 2x100Gb/40Gb QSFP28 QSFP+ L3 Leaf&Core Switch, Enterprise SONiC Ready

X206Y-48GT Access Switch 2

48x1G RJ45 POE+@740W L3 Access Switch, 6x25Gb SFP28/10Gb SFP+ Uplinks, Enterprise SONiC Ready

    FAQ

    Concerning short-distance communication, are SFP+ copper transceivers superior to SFP+ fiber transceivers?
    For short distances, SFP+ copper may be a more economical option if Cat6a or Cat7 cabling infrastructure is already established. Additionally, distinct fiber optic cables are unnecessary, and installation is simplified.

    Is there any specific configuration needed for this SFP+ transceiver?
    Yes, in most cases, SFP+ 10GBASE-T transceivers are plug-and-play. Switches or routers typically detect and configure the transceiver for 10GBASE-T operation automatically.
    Are there any other options for 10 Gigabit Ethernet connections besides SFP+ 10GBASE-T Copper?
    Yes, a variety of options exist:
    SFP+ 10GBASE-SR: Up to 300 meters of short-range multimode fiber is utilized.
    SFP+ 10GBASE-LR: runs over greater distances (up to 10 kilometers) using single-mode fiber.
    SFP+ Direct Attach Cables (DAC) are copper cable assemblies that are tailor-made for SFP+ ports. They provide an economical alternative for establishing brief 10GbE connections within a rack.

    What are the most common applications for SFP+ 10GBASE-T Copper 30m RJ-45 Transceiver Modules?
    This transceiver is intended for high-bandwidth, short-distance connections in enterprise or data center networks. It permits the utilization of pre-existing Cat6a or Cat7 copper cabling infrastructure, ensuring a smooth transition to 10 Gigabit Ethernet speeds over a distance of up to 30 meters.
    Does SFP+ support the RJ45 standard?
    RJ45 connectors, which are standard Ethernet cable connectors, are not inherently compatible with SFP+. SFP+ terminals utilize small form factor pluggable interfaces for copper or fiber optic SFP+ transceiver modules.

    Related Blogs