Indoor Tri-Band PoE WiFi 7 Access Point Ceiling/Wall Mount Support OpenWiFi / OpenWrt
AP7030
-
WiFi 7 standard supports data rates up to 9Gpbs
-
Support up to 320MHz channel width
-
Support MLO (Multi-Link Operation)
-
Support MU-MIMO, OFDMA and TWT, etc.
-
4096QAM modulation and demodulation algorithm
-
Work in 2.4GHz, 5GHz, and 6GHz frequency bands
-
Enhance network security with WPA3 and MPSK, etc.
-
Indoor AP OpenWiFi compatible
-
Roaming handoff delay is ≤10ms
Wall-plate Mount Tri-band WiFi 7 (802.11be) 9000Mpbs Wireless Access Point Seamless Roaming
The AP7030 wireless access point supports based on a Qualcomm IPQ5322 chip, which supports a maximum access rate of up to 9Gbps. The ceiling-mounted access point simultaneously works with 2.4GHz 5GHz, and 6GHz triple radio. The WiFi 7 access point adopts WPA3 to provide stronger encryption and authentication for enterprise network security. The AP7030 access point WiFi 7 supports MU-MIMO, OFDMA, spatial multiplexing technology, Multi-Link Operation, 4096QAM modulation and demodulation algorithm.
The AP7030 is supported with a single 2.5GbE PoE++ Ethernet port, a 2.5GbE Ethernet port, and a 10GbE SFP+ port uplink. Powered using PoE++ switch or DC 12V 2A. The WiFi 7 access point supports OpenWiFi and OpenWrt, which can be managed with the Asteria Campus Controller. Simplify management and flexible operation. The WiFi 7 AP is ideal for next-generation VR/AR, stadiums, Industrial IoT, and smart offices.
Specifications
|
AP Appearance


High-Performance Wi-Fi 7 AP with Advanced Features

Wi-Fi 7 (802.11be) Standards
- WiFi7 standard 2.4G/5G/6GHz dual radio, up to 9Gbps throughput.
- 320 MHz channel width support.
- Support for MU-MIMO and OFDMA.
- Backward compatible with 802.11a/b/g/n/ac/ax.

Improve Wireless Experience
- Intelligent selection of the best channel based on the surrounding RF.
- Support 802.11k/v/r protocols, roaming handoff delay is ≤10ms.
- Support bandwidth restrictions based on SSID/terminal/service, etc.
- Support WMM and target wake time (TWT).

Enterprise Security
- WPA3 provides encryption and authentication for enterprise networks.
- MPSK simplifies passkey management for WPA2 devices.
- Offer secure authentication solutions across 802.1x, Portal, MAB, WAPI, CA certificate, and others for enterprises, institutions, and hospitals.

Management & Maintenance
- OpenWiFi standard management with Asteria Campus Controller.
- Equipped with Asterfusion CX-M series OpenLAN Switching (OLS) standard POE switch, unified wired and wireless zero-touch provisioning (ZTP) and management can be achieved.
- Real-time downlink client status reporting to controller. O&M engineers can quickly locate and fix wireless network failures by viewing wireless users’ Internet access status.
Software Features
-
- Support MU-MIMO, OFDMA, TWT
- Max. Access Client Number: 1024
- Recommended Access Clients: 100
- Max. Virtual AP Number: 16
- Forwarding Mode: Direct forwarding / Tunnel forwarding
- Support SSID Hiding, Access Limitations of Low-rate Clients, Air Time Fairness (ATF)
-
- Support DFS, TPC
-
- IP Address Acquire: Static IP, DHCP acquisition
- Support DHCP, VLAN, LLDP, PPPoE Client
- Support NAT, ACL, NTP
- Support VXLAN, Dynamic VLAN, Multicast to Unicast
-
- Support 802.11k/v/r
- Support (Signal strength threshold configurable) Sticky Client Roaming
-
- Encryption: WPA-PSK / WPA2-PSK / WPA-Enterprise / WPA2- Enterprise / WPA3-Enterprise / MPSK
- Authentication: Built-in/External Portal, or Radius Client
-
- VLAN based Isolation: Support
- SSID based Isolation: Support
-
- QoS: Rate limit based on SSID, Port-based DSCP, DNS-based DSCP
- WMM (802.11e): Support
-
- Support NTP, Remote Packet Capture, ZTP
- Support Network telemetry
- Support Location Report
- Device Management: SSH, WEB, Syslog, Asteria Campus Controller