CX102S-16GT-DPU-M-SWP
Enterprise SONiC 16-Port Gigabit Switch with Two Marvell OCTEON TX2 CN9130 DPUs as Gateway and Server
Enterprise SONiC 16-Port Gigabit Switch with Two Marvell OCTEON TX2 CN9130 DPUs as Gateway and Server
10G Uplinks
PoE Support
Enterprise SONiC
Ultimate All-in-One Device: 16 Ports Gigabit Switch, Gateway, and Server Powered by SONiC, OpenWRT, and Ubuntu, Dual Marvell OCTEON TX2 CN9130 DPUs
Ultimate All-in-One Device: 16 Ports Gigabit Switch, Gateway, and Server Powered by SONiC, OpenWRT, and Ubuntu, Dual Marvell OCTEON TX2 CN9130 DPUs
The Asterfusion CX102S-16GT-DPU-M-SWP is an advanced all-in-one solution combining switch, intelligent gateway, and server, tailored for small enterprises and SOHOs. Featuring the Marvell Prestera MV-DX2556 switch chip with a 72Gbps capacity and running the enterprise SONiC version, it supports comprehensive Layer 2 and Layer 3 functions, including OSPF, BGP, MLAG, and IPv6. Additionally, it integrates 1 or 2 Marvell OCTEON CN9130 DPU chips with 4-core ARMv8 Cortex-A72 processors and encryption engines, connected via 10G Ethernet on the backplane. This combination enables it to serve as both a networking and computing infrastructure, addressing diverse application needs and providing seamless, one-stop IT services.
Software Features
Layer 2 Features
- 4K VLANs / Voice VLAN
- Multiple Spanning Tree Protocol
- QinQ
- Link Aggregation Control Protocol
- MLAG / VLAN Trunking
- Link Layer Discovery Protocol (LLDP)
- LLDP Enhancements for PoE
- Port Isolation
- IGMP Snooping
- BPDU Guard, BPDU Filter
- Loopback Detection
Layer 3 Features
- IPv4/v6 Dual Stack
- Policy Based Routing
- Resilient ECMP
- ARP-to-Host
- VRF
- Bi-Directional Forwarding Detection (BFD)
- IGMP v2/v3
- Route Map
- VRRP
- GRE
- Routing Protocols: OSPF v2/v3, BGP, MP-BGP
Management and Monitoring
- Asteria Campus Controller
- Industry Standard CLI
- Zero Touch Provisioning (ZTP)
- SNMP v1/v2/v3
- sFlow
- Port Mirroring
- Syslog
- Log Management
- PTP IEEE 1588v2 (TC and BC)
- Containerized Custom Tools
- BGP/BFD Operational Status
Quality Certifications
Application Scenarios
In addition to the standard switching functions, the CX102S-16GT-DPU incorporates two extra Marvell OCTEON TX2 CN9130 DPUs, thereby making the device the most multifaceted and versatile. It is therefore pertinent to explore the potential applications of these two DPUs .The following section outlines a number of typical scenarios in which the CX102S two DPUs are particularly effective, and which can be utilised not only individually but also in combination.
- Up to 10Gbps routing performance
- Multi-WAN load balancing
- Easy-to-use GUI
- Flexible and efficient iptables configuration suitable for a wide range of scenarios
- GUFW provides a simple and user-friendly GUI
- Hardware-accelerated OpenVPN with encryption/decryption engine supports up to 5Gbps throughput
- WireGuard benefits from a 4-core CPU for accelerated performance
- Installation of the latest VPN software on demand to adapt to changing network environments
- Leading open-source IDS/IPS with continuously updated rule sets from its active open community
- Open-source SNORT GUI provides an easy-to-use user interface
- The active community provides regularly updated rule sets to protect against the latest cyber-attacks
- Run on the second DPU
- Hosting corporate websites
- Install CiviCRM, ERPNext and other open source software on demand to achieve free CRM, ERP and other services
- Run on the second DPU
- Centralized management of APs
- ZTP for automatic deployment and operation
Connectivity Solutions
72 Gbps
53.5 Mpps
3MB
Features
Intelligent PoE++ Power Delivery for Next-Gen Networks
8 Ports Support PoE++
IEEE 802.3af/at/bt
150W
Rich L2/L3 Features
Advanced Routing Capabilities
BFD-Based Link Fault Detection & Re-routing in Sub-50ms
Achieve seamless redundancy and active-active reliability with MC-LAG support
MC-LAG support enables networks to maintain uninterrupted connectivity through seamless redundancy and active-active reliability,
ensuring zero downtime and optimal performance during link or device failures.
CX102S-16GT-DPU-M-SWP layer 2 and layer 3 access switches fully support IEEE 1588 PTPv2 and SMPTE 2059-2 standards through both hardware and software. The hardware port supports PTP as a Boundary Clock (BC) or Transparent Clock (TC), with customizable modules to fit customer needs. On the software side, Asterfusion leads the way in implementing and optimizing PTP in SONiC, delivering top performance on our AsterNOS Enterprise Distribution. Currently, it supports PTP Class A with a maximum time error of ≤50 ns. →For More←
Our campus switches, powered by enterprise SONiC, integrate with a TIP OpenWiFi – based controller. This integration enables unified monitoring, automated deployment, and streamlined operations.
Key features include intelligent topology planning, ZTP, real – time network visualization, and script – based automation. With centralized remote management and flexible deployment options (cloud or on – premise), this solution offers full control over the entire campus network, from APs to switches. It helps IT teams optimize performance, speed up troubleshooting, and scale easily. →For more←
Our campus switches, powered by enterprise SONiC, integrate with a TIP OpenWiFi – based controller. This integration enables unified monitoring, automated deployment, and streamlined operations.
Key features include intelligent topology planning, ZTP, real – time network visualization, and script – based automation. With centralized remote management and flexible deployment options (cloud or on – premise), this solution offers full control over the entire campus network, from APs to switches. It helps IT teams optimize performance, speed up troubleshooting, and scale easily. →For more←
Panel
What’s in the box
