Skip to main content
Campus Access and Aggregation

CX102S-8GT-M-SWP

8x1G RJ45 POE++ @150W L2/3 Access Switch, 2x10Gb SFP+ Uplinks, Enterprise SONiC Ready, MLAG VXLAN Support

  • 8 ports 1G RJ45 with 2 ports 10G SFP+ uplinks
  • Support 8-port PoE++ (802.3bt)@150W
  • Rich Layer 2/3 features
  • Enterprise SONiC Distribution preload
Please login to request a quote
8-Port-1G-L2-L3-Access-Switch-1
8-Port-1G-L2-L3-Access-Switch-2
8-Port-1G-L2-L3-Access-Switch-3
8-Port-1G-L2-L3-Access-Switch-4

8-port Gigabit POE++ Switch, 8x1G RJ45 POE++ @150W L2/3 Ethernet Switch, 2x10Gb SFP+ Uplinks, Enterprise SONiC Ready, Marvell AlleyCat 5Y

The 8-port gigabit POE++ switch, CX102S-8GT-M-SWP has 8x 10/100/1000BASE-T ports and 2x10G SFP+ ports. It supports a maximum of 8-port PoE++ (802.3bt) for powering attached IP phones, wireless access points, or other standards-compliant PoE and PoE+ end network devices. Benefited from commercial SONiC NOS-AsterNOS, it supports rich layer 2 and layer 3 functions, including routing functions like OSPF and BGP, and other features like MLAG and IPV6 functions. This access switch offers a compact and cost-effective solution for campus networks, SMBs, and enterprise networks.

Specifications

Ports8 x 1G RJ45 PoE++, 2 x 10G SFP+Switch ASICMarvell AlleyCat5Y
Management interface1x USB2.0; 1x Console RJ45Switching Capacity72Gbps
Forwarding Rate41.6MppsMac Address Entries32K
RAM4GBIPv4 Prefix Routes13K
Flash Memory32GB eMMCIPv6 Prefix Routes6.5K
Max. Power Consumption37WARP
Entries		6K
Packet Buffer3MBInput Range100-240V AC
PoE StandardIEEE 802.3af/at/btPoE Budget150W
Operating Temperature0 - 45℃Power Module1 Built-in Power
Dimensions (HxWxD)44 x 215 x 310mmFan Modules2 Built-in Fans
Weight2.2KGAirflowFront to Rear

Hardware Panel

CX102S-8GT-M-SWP-hardware-panel

Software

Features

layer-2-features-icon

Layer 2 Features

  • 4K VLANs
  • Voice VLAN
  • Multiple Spanning Tree Protocol
  • QinQ
  • Link Aggregation Control Protocol
  • Multi-Chassis Link Aggregation
  • VLAN Trunking
  • Link Layer Discovery Protocol (LLDP)
  • LLDP Enhancements for PoE
  • Port Isolation
  • Jumbo Frames (9216 Bytes)
  • IGMP Snooping
  • Storm Control
  • Monitor Link
  • BPDU Guard, BPDU Filter
  • Loopback Detection
layer-3-features-icon

Layer 3 Features

  • IPv4/v6 Dual Stack
  • Policy Based Routing
  • Resilient ECMP
  • ARP-to-Host
  • VRF
  • Bi-Directional Forwarding Detection (BFD)
  • Route Map
  • VRRP
  • Routing Protocols: OSPF v2/v3, BGP, MP-BGP
security-features-icon

Security Features

  • Service ACLs
  • ACL Logging and Counters
  • Control Plane Policing (CoPP)
  • Dynamic ARP Inspection (DAI)
  • IP Source Guard v4/v6
  • DHCPv4/v6 Relay
  • DHCPv4/v6 Snooping
  • ND Snooping
  • 802.1x Authentication
  • Portal Authentication
  • MAC Authentication Bypass (MAB)
  • Dynamic VLAN Assignment
  • TACACS+
  • RADIUS
  • IPSG/DAI/SAVI
management-and-monitoring-icon

Management and Monitoring

  • Asteria Campus Controller
  • Industry Standard CLI
  • Zero Touch Provisioning (ZTP)
  • SNMP v1/v2/v3
  • Port Mirroring
  • Syslog
  • Log Management
  • PTP IEEE 1588v2 (TC and BC)
  • Containerized Custom Tools
  • BGP/BFD Operational Status
quality-of-service-icon

Quality of Service (QoS)

  • 8 Queues per Port
  • 802.1p Based Classification
  • DSCP Based Classification
  • Strict priority queueing
  • DWRR Scheduling
  • Policing/Shaping
  • Rate Limiting

Enterprise SONiC 8 Ports RJ45 POE+ Switches with PTP Support(Optional)

 CX102S-8GT-M-SWP 8 port PoE+ switch fully supports IEEE1588 PTPv2 and SMPTE 2059-2 standards both through hardware and software. The hardware port supports PTP as a Boundary Clock (BC) or Transparent Clock (TC), with customizable modules to fit customer needs. On the software side, Asterfusion leads the way in implementing and optimizing PTP in SONiC, delivering top performance on our AsterNOS Enterprise Distribution. Currently, it supports PTP Class A with a maximum time error of ≤50 ns. →For More← 

ptp optimized sonic switches

Network Packet Broker Functionality (Optional)

the-software-architecture-of-the-sonic-based-packet-broker

The SONiC-based campus switches CX-M series take full advantage of SONiC’s open and containerized architecture, and fully leverage its capabilities by installing the new APP-PB container and deploying packet broker docker functionality on SONiC. This integration unlocks a range of advanced features, including traffic mirroring, raw data tagging, filtering, aggregation, preprocessing, load balancing, and output replication. →For more←

Resources

Datasheet CX-M Series Access Switches

Warranty

This model is backed by a 2 year limited hardware warranty. Multiple extended support options, including advanced replacement and 24×7 support services, are available. Contact us for complete details.

You Might Like