Skip to main content

40GBASE-SR4 QSFP+ 850nm MMF 150m (OM4) MTP/MPO -12 Transceiver Module

QSFP-40G-SR4-MM

$30.00

Add to Quote
  • High-Speed Transmission: Four channels with 11.3Gbps per channel, for fast data transport.
  • Accurate Signal Integrity: PIN photo detector and 850nm VCSEL array.
  • Low power consumption: Operates at less than 1.5 watts.
  • Network Reach: Up to 100m over OM3 and 150m over OM4 MMF.
  • Simple Installation: Uses a single MPO connector and a hot-pluggable QSFP form factor.
  • Efficient power usage: Operates on a single 3.3V supply.
  • Duplex LC Receptacle: Standardized for a consistent connection.
QSFP-40G-SR4-MM-Optical-Transceiver-Module-1
QSFP-40G-SR4-MM-Optical-Transceiver-Module-2
QSFP-40G-SR4-MM-Optical-Transceiver-Module-3
QSFP-40G-SR4-MM-Optical-Transceiver-Module-5

Check out our ISO 14001, ISO 45001, and ISO 9001 certified optical transceivers for quality and reliability. Our transceiver modules are flexible and high-performance compatible with multiple vendor brands. Trust in our certified solutions to elevate your network.

40GBase-SR4 QSFP+ Transceiver Module( 850nm, MPO 150m(OM4), MMF)

The QSFP+ transceiver module features a four-channel, pluggable, parallel, 12-fiber MTP/MPO male connectors, fiber-optic QSFP+ transceiver, enabling connectivity up to 150 meters on OM4 MMF and 100 meters on OM3 MMF. This 40G SR4 QSFP+ module uses a top-quality 850nm VSCEL (Vertical Cavity Surface Emitting Laser) transmitter and an 11.3Gb/s PIN photodiode receiver. QSFP+ 40Gbase SR4 operates in the Standard 0°-70°C temperature range. It is fully compatible with all standard 40GBASE-SR4 interfaces. Equipped with digital diagnostic monitoring through the I2C interface, as outlined in the QSFP+ MSA, it facilitates real-time access to operational parameters. This optical module is designed for ease of installation. It is hot-swappable, making it ideal for a wide range of uses, including data centers, campus networks, and within or between switches, routers, network interface cards (NICs), and other transport equipment.

Specification

Form FactorQSFP+Vendor NameAsterfusion
MediaMMFWavelength850nm
ConnectorMTP/MPO-12Max. Cable Distance100m (OM3)/ 150m (OM4)
Max Data Rate45.2GbpsPower Consumption<1.5w
Transmitter TypeVCSELReceiver TypePIN
Extinction Ratio>3dBReceiver Sensitivity<-5.4dBm
DDMsupportedBit Error RateE-12
Humidity5-85%Power Supply3.3V
Storage Temperature-20 to 85°C (-40 to 185°F)Operating Case Temperature0 to 70°C (32 to 158°F)
Average Launch Power (Min) Each Lane-7.6dBmAverage Launch Power (Max) Each Lane2.4dBm
Data Rate Per Lanetypical 11.3GbpsProtocols40G Ethernet Compliant and OTU3

Connectivity solution

Layer2/3 Open Access & Aggregation Network Switches -Enterprise SONiC Distribution Preload

View All Products
24x1G-RJ45-L2-L3-Access-Switch-3

24x1G RJ45 POE+ @740W L3 Access Switch, 4x25Gb SFP28/10Gb SFP+ Uplinks, Enterprise SONiC Ready

CX202P-24Y-M-H 24 Port 25G L3 Core Leaf Switch 1

24x25G SFP28, 2x100G QSFP28 Uplinks, L3 Core/Leaf Switch, Enterprise SONiC Ready

X206Y-48GT Access Switch 2

48x1G RJ45 POE+@740W L3 Access Switch, 6x25Gb SFP28/10Gb SFP+ Uplinks, Enterprise SONiC Ready

48x1G-RJ45-L2-L3-Access-Switch-4

48x1G RJ45 POE+@740W L3 Access Switch, 4x25Gb /10Gb Uplinks, Enterprise SONiC Ready

48x1G-RJ45-L2-L3-Access-Switch-4

48x1G RJ45 L2/3 Access Switch, 4x25Gb/10Gb SFP28 Uplinks, Enterprise SONiC Ready

24x1G-RJ45-L2-L3-Access-Switch-3

24x1G RJ45 POE+@370W L3 Access Switch, 4x25Gb/10Gb SFP28 Uplinks, Enterprise SONiC Ready

24x1G-RJ45-L2-L3-Access-Switch-3

24x1G RJ45 L2/3 Access Switch, 4x25Gb/10Gb SFP28 Uplinks, Enterprise SONiC Ready

X206P-48S L3 Leaf & Core Switch Enterprise SONiC Marvell Aldrin2

24x10Gb SFP+, 6x100Gb QSFP28/40Gb QSFP+ L3 Aggregation/Core Switch, Enterprise SONiC Ready

CX202P-16S aggregation switch 2

16x10Gb SFP+, 2x100Gb/40Gb QSFP28 QSFP+ L3 Leaf&Core Switch, Enterprise SONiC Ready

    FAQ

    What is 40GBASE-SR4?
    Short-distance 40GBASE-SR4 Ethernet allows 40 gigabits per second. Data centers need rapid, efficient 150-meter data transfer.

    Which module powers 40G Ethernet?
    40 Gigabit Ethernet uses QSFP+ modules. Their speed and capacity make them ideal for huge data center network backbones.

    The QSFP+ 40GBASE-SR4 module has what connector?
    The module has an MPO-12 connector, which handles 12 fibers, allowing considerable data traffic.

    Which cables support 40G SR4?
    SR4 40G transceivers use OM3 and OM4 multimode fibers. These cables support many light modes and short-distance high-speed data exchanges.

    How far does the 40G SR4 transceiver transmit data ?
    QSFP+ 40GBASE-SR4 uses OM4 multimode fiber to transport data 150 meters between nearby buildings.

    Related Blogs