Skip to main content

QSFP28-100G-SR4 MSA 850nm MMF 100m(OM4) MPO Transceiver Module

QSFP28-100G-SR4-MM

$77.00

Add to Quote
  • Hot-pluggable design for seamless integration.
  • Substantial 103.125 Gb/s aggregate bitrate.
  • Optimized 850nm VCSEL and PIN photodetector array.
  • Integrated Clock and Data Recovery (CDR) circuits.
  • Low 2-watt maximum power consumption.
  • Supports 70m OM3 and 100m OM4 fiber transmission.
  • Single MTP/MPO optical connectivity.
  • Wide 0 to 70°C operating temperature range.
QSFP28-100G-SR4-MM-Optical-Transceiver-Module-1
QSFP28-100G-SR4-MM-Optical-Transceiver-Module-2
QSFP28-100G-SR4-MM-Optical-Transceiver-Module-3
QSFP28-100G-SR4-MM-Optical-Transceiver-Module-5

100GBASE SR4 QSFP28 Transceiver Module (850nm, 100(OM4), MMF)

The 100GBASE-SR4 QSFP28 transceiver is designed for 100 Gigabit Ethernet networks. The QSFP28-SR4 100G transceiver can reach 100 meters over multimode fiber (MMF). This module adheres to the QSFP28 Multi-Source Agreement (MSA) and IEEE standards, including the IEEE 802.3bm 100GBASE-SR4 and CAUI-4 specifications. The 100G QSFP28 Transceiver features a 12-fiber MTP/MPO connector to ensure that signals are delivered and received reliably and effectively. This optical module is ideal for storage area networks (SANs), HPC clusters, and network switches.

Specification

Form FactorQSFP28Vendor NameAsterfusion
MediaMMFWavelength850nm
ConnectorMTP/MPO-12Max. Cable Distance70m (OM3)/100m(OM4)
Max Data Rate103.125Gbps (4x 25.78Gbps)Power Consumption<2W
Transmitter TypeVCSELReceiver TypePIN
Extinction Ratio>3dBPower Supply3.3V
CDR (Clock and Data Recovery)TX & RX Built-in CDRHumidity5-85%
Storage Temperature-20 to 85°C (-40 to 185°F)Operating Case Temperature0 to 70°C (32 to 158°F)
DDM/DOMSupportedProtocolsQSFP28 MSA, IEEE 802.3bm

Connectivity solution

100G-Connectivity-with-Direct-Connect-Cabling-QSFP28-100G-SR4-MM

Layer2/3 Open Network Switches -Enterprise SONiC Distribution Preload

View All Products
X206P-24S-thumbnail

24x10Gb SFP+, 6x100Gb QSFP28/40Gb QSFP+ L3 Aggregation/Core Switch, Enterprise SONiC Ready

CX202P-16S-thumbnail

16x10Gb SFP+, 2x100Gb/40Gb QSFP28 QSFP+ L3 Leaf&Core Switch, Enterprise SONiC Ready

X204Y-24GT-thumbnail

24x1G RJ45 POE+@370W L3 Access Switch, 4x25Gb/10Gb SFP28 Uplinks, Enterprise SONiC Ready

    FAQ

    What is 100GBASE SR4 optical transceiver?
    100GBASE-SR4 Ethernet is fast. Data centers and networking infrastructures use it for fast, reliable, short-distance communication. 100GBASE-SR4 uses SR4 fiber for 100 Gigabit Ethernet. The transceiver transmits data up to 100 meters using multimode fiber.

    Can a 40 Gigabit device connect to 100 Gigabit?
    Even while this transceiver operates at 100 Gigabit, some network equipment can negotiate lesser speeds. Please consult your equipment manuals for compatibility and setup choices for a 100G to 40G connection.

    What is the meaning of 4 x 25G-SR?
    This means the transceiver uses four 25 Gigabit channels to reach 100 Gigabits.

    What connector does this transceiver use?
    The MPO-12/UPC connector on this transceiver can connect up to 12 multimode fibers.

    What is the definition of SR4 cable?
    SR4 cables are designed for 100GBASE-SR4 QSFP28 transceivers. This cable supports short-range multimode fiber communications. supports four transceivers transmit and receive channels with 12 fibers.

    Related Blogs