Skip to main content

QSFP28 100G-DR1 Compatible 1310nm 500m Single Lambda Transceiver Module

QSFP28-100G-DR1-SM

$233.00

Add to Quote
  • Maximum power consumption is 4W.
  • QSFP28 MSA, and IEEE 100GBASE-DR compliant.
  • 4×25.78125Gbps CAUI-4 electrical interface.
  • 106.25Gbps PAM4 VCSEL transmitter and PIN Receiver.
  • Hot-pluggable QSFP28 form factor.
  • Operates temperature from 0°C to 70°C.
  • Duplex LC receptacles assure connectivity.
  • Environment-safe RoHS compliance.
qsfp28-100g-dr1-sm-optical-transceiver-module-1
qsfp28-100g-dr1-sm-optical-transceiver-module-2
qsfp28-100g-dr1-sm-optical-transceiver-module-4
qsfp28-100g-dr1-sm-optical-transceiver-module-5

100GBASE-DR1-QSFP28 Optical Transceiver Module( 1310nm,500nm, Duplex LC, SMF)

The 100GBASE-DR1 QSFP28 transceiver module supports up to 500 meters on G.652 SMF with KP-FEC. This 100Gbase DR1 transceiver complies with the QSFP28 Multi-Source Agreement (MSA) and the IEEE 802.3cu 100GBASE-DR1 standards. The 100G PAM4 digital signal processor (DSP) improves signal processing and supports 106.25 Gb/s aggregate data speeds. Its energy efficiency comes from its low power consumption of 4 watts and commercial temperature range of 0 to 70 degrees Celsius. The optical module has a 4-channel 1310nm VCSEL array and PIN photo detector for reliable performance up to 500 meters. Additionally, it offers stable connections in the data center, 4:1 breakout with 400GBASE-DR4, and switches or routers. It adheres to RoHS, making it an environmentally responsible choice for modern network environments.

Specification

Form FactorQSFP28Vendor NameAsterfusion
MediaSMFMax. Cable Distance500m
ConnectorDuplex LCDDM/DOMSupported
Transmitter TypeEMLReceiver TypePIN
Wavelengths Range1310nmPower Consumption<4w
Data Rate106.25GbpsHumidity(non-condensing)5-85%
Bit Error Rate
2.4E-4 (Pre-FECs)Supply Voltage3.3V
Extinction Ratio>3.5dBElectrical Interface Hot pluggable
Operating Case Temperature0 to 70°C (32 to 158°F)ApplicationData center network
Part NumberQSFP28-100G-DR1-SMProtocolsQSFP28 MSA, IEEE 802.3cu

Connectivity solution

32-Port QSFP28 Low Latency Data Center Switch, Enterprise SONiC Ready, Marvell Teralynx: CX532P-N
Read more
48-Port 25G Data Center Leaf (TOR) Switch with 8x100G Uplinks, SONiC Enterprise Ready, Marvell Falcon: CX308P-48Y-N
Read more
32-Port 400G QSFP-DD Low Latency AI/ML/Data Center Switch, Enterprise SONiC Ready,CX732Q-N
Read more
32-Port QSFP28 Low Latency Data Center Switch, Enterprise SONiC Ready, Marvell Teralynx: CX532P-N
Read more

Layer2/3 Open Network Switches -Enterprise SONiC Distribution Preload

View All Products
X206P-48S L3 Leaf & Core Switch Enterprise SONiC Marvell Aldrin2

24x10Gb SFP+, 6x100Gb QSFP28/40Gb QSFP+ L3 Aggregation/Core Switch, Enterprise SONiC Ready

CX202P-16S aggregation switch 2

16x10Gb SFP+, 2x100Gb/40Gb QSFP28 QSFP+ L3 Leaf&Core Switch, Enterprise SONiC Ready

    FAQ

    What is the 100G DR1 optical transceiver used for?
    The optical modules are ideal for high-speed, short-distance transmission in data centers, especially in spine-and-leaf network topologies.

    In what range does a 100G DR1 optical transceiver work best?
    For instance, a standard single-mode fiber (G.652) can typically cover distances of up to 500 meters.

    What is the QSFP28 100G DR1 optical transceiver connector?
    It is usually duplex LC connectors.

    What length of wave does a 100G DR1 have?
    A single band of 1310 nanometers (nm) makes it work.

    Related Blogs