Skip to main content

800G OSFP SR8 850nm 100m/OM4 MPO-16 APC Optical Transceiver Module

OT-800G-OSFP-SR8

$980.00

Add to Quote
  • Maximum power consumption below 13.5W.
  • Hot-pluggable OSFP form factor.
  • 8 channels 850nm VCSEL array.
  • 8 channels PIN photo detector array.
  • 8×106.25Gbps (53.125GBd PAM4) electrical interface.
  • 8×106.25Gbps (53.125GBd PAM4) optics architecture.
  • Transmit over multi-mode fibers up to 100m.
  • MPO-16 APC connector, 3.3V supply voltage.
  • Digital diagnostic functions are available.
  • CMIS and RoHS compliant.
  • Commercial-grade temperature ranges from 0℃ to +70℃.
800G-OSFP-SR8-Optical-Transceiver-Module-1
800G-OSFP-SR8-Optical-Transceiver-Module-2
800G-OSFP-SR8-Optical-Transceiver-Module-3
800G-OSFP-SR8-Optical-Transceiver-Module-4

MSA Compatible 800G OSFP SR8 Optical Transceiver Module (MMF, 850nm, 100m, MPO-16)

The eight-channel full-duplex transceiver module for 800 Gigabit Ethernet and the OSFP 800GBASE SR8 optical transceiver module enhance data transfer. This OSFP 800G SR8 module with stable, MPO-16 APC for multi-lane data transfer. PAM4 technology powers this OSFP SR8 module at 10.3125 Gbps per channel with an 850nm VCSEL array and PIn photodetector array. It supports 100m on multi-mode fiber and consumes less than 13.5W for energy efficiency. It is hot-pluggable for quick installation and maintenance, and works between 0°C and +70°C, making it appropriate for many situations, providing excellent data transmission performance and reliability. The SR8 optical module complies with the IEEE 802.3db 2x400GBASE-SR4, OSFP MSA specifications. The 800G SR8 optical module is RoHS-compliant. It is ideal for 800G Ethernet, cloud service providers, and AI/ML enterprises.

Specification

Form FactorOSFPVendor NameAsterfusion
MediaMMFMax. Cable Distance60m(OM3) | 100m(OM4)
Data Rate8x106.25GbpsWavelengths Range850nm
ConnectorDual MPO12 APCDDM/DOMSupported
Extinction Ratio>2.5dBPower Consumption<13.5W
Supply Voltage3.3VHumidity(non-condensing)5-95%
Transmitter TypeVCSELReceiver TypePIN
Operating Case Temperature0 to 70°C (32 to 158°F)Electrical Interface Hot pluggable
Storage Temperature-20 to 85°C (-4 to 185°F)Application800G Ethernet; Data centers networks
Part NumberOT-800G-OSFP-SR8ProtocolsOSFP MSA and IEEE 802.3db compliant;

Connectivity solution

800G-OSFP-SR8 optical transceiver module connection

Questions & Answers

What is an OSFP transceiver module?
An OSFP (Octal Small Form-factor Pluggable) transceiver module is a high-speed optical transceiver designed for data centers.

How does SR8 vary from previous classifications such as LR4, DR4, or SR4?

These labels relate to the number of optical lanes, fiber type, and reach:
SR8: (Short Reach 8-channel): 8 optical lanes, MMF, extremely short reach (up to 100m).
SR4: (Channel Short Reach) uses four optical lanes, MMF, and a relatively short reach (up to 100m).
Data Center Reach 4-channel, or DR4 uses four optical lanes, SMF, and a greater reach of up to 500 meters.
SMF is used in LR4 (Long Reach 4-channel), which has four optical lanes and a long reach of up to 10 kilometers.

What are common types of 800G optical transceivers?
OSFP (Octal Small Form Factor Pluggable) transceiver modules designed for long-distance data transmission over metropolitan and wide-area networks.
QSFP-DD (Quad Small Form Factor Pluggable Double Density) transceiver modules designed for connecting different parts of a campus or large building.

What are some standard procedures for troubleshooting?

Fiber Inspection: Verify that the MMF cables are clean and connected correctly. Make use of a fiber scope.
Make sure that the transceiver is completely inserted in the OSFP port.
Router/Switch Configuration: Verify that the port is set up properly for 800G.
Optical transmission and receive power levels should be monitored.
Loopback Testing: To identify the problem, run loopback tests.
Examine the logs: Check for problems in the switch/router logs.

Related Blogs